ZyXEL Communications ARMOR G1 NBG6818, User Manual

Page: 108 / 183

Chapter 10 Wireless LAN
NBG6818 User’s Guide
108
10.3 G ue st WiFi Sc re e n
This screen allows you to enable and configure guest wireless network settings on the NBG6818.
Click
Se tting s
>
WiFi
>
G ue st WiFi
to show the following screen.
Note: This is not available if you are using bridge mode.
Fig ure 59
Settings > WiFi > Guest WiFi
The following table describes the labels in this screen.
10.4 MAC Filte r Sc re e n
The MAC filter screen allows you to give exclusive access to devices (
Allo w
) or exclude devices from
accessing the NBG6818 (
De ny
). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters,
Table 33 Settings > WiFi > Guest WiFi
LABEL DESC RIPTIO N
Enable Guest
WiFi Select
Ena b le
to activate the guest WiFi. Select
Disa b le
to turn it off.
Name (SSID) An SSID profile is the set of parameters relating to one of the NBG6818’s BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
Password The password has two uses.
• Manual: Manually enter the same password on the Zyxel Device and the client. Enter 8-63
ASCII characters or exactly 64 hexadecimal (‘0-9’, ‘a-f’) characters.
• WPS: When using WPS, the Zyxel Device sends this password to the client.
Click the
Eye
icon to show or hide the password of your wireless network. When the
Eye
icon
is slashed , you’ll see the password in plain text. Otherwise, it is hidden.
Apply Click
Apply
to save your changes back to the NBG6818.
Cancel Click
C a nc e l
to reload the previous configuration for this screen.