![background image](http://html1.mh-extra.com/html/zyxel-communications/armor-g1-nbg6818/armor-g1-nbg6818_user-manual_945983040.webp)
Chapter 6 Bridge Mode
NBG6818 User’s Guide
40
2
To use your NBG6818 as a bridge, go to
Se tting s > Syste m > O pe ra ting Mo de
and select
Bridg e Mo de
.
Fig ure 17
Changing to Bridge mode
Note: You have to log in to the Web Configurator again when you change modes. As soon as
you do, your NBG6818 is already in Bridge mode.
3
When you select
Bridg e Mo de
, the following pop-up message window appears.
Fig ure 18
Pop up for Bridge mode
Click
O K
. Then click
Apply
. The Web Configurator refreshes once the change to Bridge mode is
successful.
6.3.1 Ac c e ssing the We b C o nfig ura to r in Bridg e Mo de
Log in to the Web Configurator in Bridge mode, do the following:
1
Connect your computer to the LAN port of the NBG6818.
2
The default IP address of the NBG6818 in bridge mode is “192.168.123.2”. In this case, your computer
must have an IP address in the range between “192.168.123.3” and “192.168.123.254”.
3
Click
Sta rt > Run
on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show
your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix
B on page 153
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type
“192.168.123.2” as the web address in your web browser.
Summary of Contents for ARMOR G1 NBG6818
