Chapter 8 Applications
NBG6818 User’s Guide
71
Fig ure 34
USB Application > FTP > Add Rule
The following table describes the labels in this screen.
8.4.3 USB Me dia Sha ring Sc re e n
Use this screen to configure settings for media sharing.
Table 20 USB Application > FTP > Add Rule
LABEL
DESC RIPTIO N
Status
Select
Ena b le
to enable the account.
Select
Disa b le
to disable the account.
User Name
Enter a user name that will be allowed to access the shared files. You can enter up
to 20 characters. Only letters and numbers allowed.
Password
Enter the password used to access the shared files. You can enter up to 20
characters. Only letters and numbers are allowed. The password is case sensitive.
USB
Specify the user’s access rights to the USB storage device which is connected to the
NBG6818’s USB port.
Re a d & Write
- The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Re a d
- The user has read rights only and can not create or edit the files on the
connected USB device.
No ne
- The user cannot access the files on the USB device(s) connected to the USB
port.
Upstream Bandwidth
Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
Downstream Bandwidth
Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Apply
Click
Apply
to save your changes back to the NBG6818.
Cancel
Click
C a nc e l
to exist the screen without saving.
Summary of Contents for ARMOR G1 NBG6818
