ZyXEL Communications ARMOR G1 NBG6818, User Manual

Page: 33 / 183

Chapter 3 The Web Configurator
NBG6818 User’s Guide
33
USB Application SAMBA Use this screen
• Set up file-sharing via the NBG6818 using Windows Explorer or the
workgroup name
• Configure the workgroup name and create file-sharing user accounts
FTP Use this screen to set up file sharing via the NBG6818 using FTP and create user
accounts.
USB Media
Sharing Use this screen to configure settings for media sharing.
WiFi Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
MAC Filter Use the MAC filter screen to configure the NBG6818 to block access to devices
or block the devices from accessing the NBG6818.
WPS Use this screen to configure WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN LAN IP Use this screen to configure the NBG6818’s LAN IP address and subnet mask.
Use this screen to configure the IPv6 address for the NBG6818 on the LAN.
Use this screen to enable the NBG6818’s DHCP server.
System Status Use this screen to view the basic information of the NBG6818
General
Setting Use this screen to change password or to set the timeout period of the
management session.
Remote
Access Use this screen to enable remote assistant.
Maintenance Use this screen to upload firmware, reboot the NBG6818 without turning the
power off or reset the NBG6818 to factory default.
Operating
Mode Use this screen to select whether your device acts as a router, or a bridge.
Logs Use this screen to view the list of activities recorded by your NBG6818.
Table 4 Settings > System > Status (Bridge Mode) (continued)
LINK TAB FUNC TIO N