ZyXEL Communications AAM1212, User Manual

Page: 240 / 288

AAM1212 User’s Guide
Chapter 28 Switch Commands 239
where
This command enables the MAC count filter on the specified ADSL port(s). You can only
enable the MAC count filter on ADSL ports that do not have the MAC filter enabled.
The following example turns on the MAC count filter on ADSL port 4.
Figure 150 MAC Count Enable Command Example
28.12.3 MAC Count Disable Command
Syntax:
switch mac count disable <portlist>
where
This command disables the MAC filtering feature on the specified ADSL port(s).
The following example turns off the MAC count filter on ADSL port 4.
Figure 151 MAC Count Disable Command Example
28.12.4 MAC Count Set Command
Syntax:
switch mac count set <portlist> <count>
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> switch mac count enable 4
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> switch mac count disable 4