ZyXEL Communications AAM1212, User Manual

Page: 118 / 288

AAM1212 User’s Guide
Chapter 9 VLAN 117
Figure 57 VLAN Port Setting
The following table describes the labels in this screen.
Table 28 VLAN Port Setting
LABEL DESCRIPTION
VLAN Status Click VLAN Status to see which of the AAM’s ports are members of which VLANs.
Static VLAN
Setting
Click Static VLAN Setting to configure ports to dynamically join a VLAN group or
permanently assign ports to a VLAN group or prohibit ports from joining a VLAN
group.
Port The port numbers identify the AAM’s ports.
PVID Type the Port VLAN ID (PVID) from 1 to 4094. The AAM assigns the PVID to
untagged frames or priority frames (0 VID) received on this port.
Priority Select an IEEE 802.1p priority to assign to untagged frames or priority frames (0
VID) received on this port. See Table 11 on page 78 for more information on the
priority levels.
GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a
way for switches to register necessary VLAN members on ports across the
network. The AAM propagates VLAN information to other devices when this check
box is selected.
a
Acceptable Frame
Type
Select All to have the port accept both tagged and untagged incoming frames.
Select Tag Only to have the port only accept incoming frames that have a VLAN
tag.
Select
Untag Only to have the port only accept incoming frames that do not have a
VLAN tag.
b
Apply Click Apply to save your changes to the AAM’s volatile memory. The AAM loses
these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are
done configuring.