ZyXEL Communications AAM1212, User Manual

Page: 205 / 288

AAM1212 User’s Guide
204 Chapter 27 ADSL Commands
where
This command records the telephone number of an ADSL subscriber telephone number.
The following example records the telephone number “12345678” for ADSL port 5.
Figure 114 ADSL Tel Command Example
27.3.10 ADSL Loopback Command
Syntax:
adsl loopback <portlist> <f5> <vpi> <vci>
where
This command has the AAM perform a loopback test on the specified ADSL port(s).
The following example has the AAM perform a local loopback test on ADSL port 1.
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
<tel>
= An ADSL subscriber’s telephone number.
ras> adsl tel 5 12345678
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
<f5>
= Use f5 to perform an OAMF5 loopback test on the specified
DSL port. An Operational, Administration and Maintenance
Function 5 test is used to test the connection between two DSL
devices. First, the DSL devices establish a virtual circuit. Then
the local device sends an ATM F5 cell to be returned by the
remote DSL device (both DSL devices must support ATM F5 in
order to use this test).
<vpi> <vci>
= When you perform an OAMF5 loopback test, specify a VPI/
VCI.