ZyXEL Communications AAM1212, User Manual

Page: 237 / 288

AAM1212 User’s Guide
236 Chapter 28 Switch Commands
The following example displays the MAC filtering status and the fixed source MAC addresses
on ADSL port 5.
Figure 144 MAC Filter Show Command Example
28.11.2 MAC Filter Enable Command
Syntax:
switch mac filter enable <portlist>
where
This command turns on the MAC filtering feature on the specified ADSL port(s) or on all
ADSL ports if no port is specified.
The following example turns on the MAC filtering feature on ADSL port 5.
Figure 145 MAC Filter Enable Command Example
28.11.3 MAC Filter Disable Command
Syntax:
switch mac filter disable <portlist>
ras> switch mac filter show 5
status:V, only listed MACs can pass through this port.
status:-, every MAC can pass this port.
port status mac
---- ------ -----------------
5 V 00:00:00:00:00:29
00:00:00:00:00:2a
00:00:00:00:00:2b
00:00:00:00:00:2c
00:00:00:00:00:2d
00:00:00:00:00:2e
00:00:00:00:00:2f
00:00:00:00:00:30
00:00:00:00:00:31
00:00:00:00:00:32
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> switch mac filter enable 5