Zycoo ZP502 User Manual Download

Page: 46 / 58

ZP502 User Manual

Update

Field name

explanation

Web Update

Click the browse button, find out the config file saved before or

provided by manufacturer, download it to the phone directly, press

“Update” to save. You can also update downloaded update file, logo

picture, ring, mmiset file by web.

Server

Set the FTP/TFTP server address for download/upload. The address

can be IP address or Domain name with subdirectory.

Username

Set the FTP server Username for download/upload.

Password

Set the FTP server password for download/upload.

File name

Set the name of update file or config file. The default name is the

MAC of the phone, such as 000102030405.

Notice:

You can modify the exported config file. And you can also download config file which

includes several modules that need to be imported. For example, you can download a config

file just keep with SIP module. After reboot, other modules of system still use previous setting

and are not lost.

Type

Action type that system want to execute

：

1. Application update: download system update file

2. Config file export: Upload the config file to FTP/TFTP server,

name and save it.

3. Config fie import: Download the config file to phone from

FTP/TFTP server. The configuration will be effective after the

phone is reset.

Protocol

Select FTP/TFTP server

4.3.5.5. Account Config

You can add or delete user account, and change the authority of each user account in this web page

Summary of Contents for ZP502



























































Search results

Summary of Contents for ZP502

Reviews:

Related manuals for ZP502

Brands by name

Popular brands

Zycoo ZP502, User Manual

Search results

Summary of Contents for ZP502

Reviews:

Related manuals for ZP502

Brands by name

Popular brands