ZP502 User Manual
34
DIAL PEER
Field name
explanation
Phone number
There are two types of matching conditions: one is full matching,
the other is prefix matching. In the Full matching, you need input
your desired phone number in this blank, and then you need dial the
phone number to realize calling to what the phone number is
mapped. In the prefix matching, you need input your desired prefix
number and T; then dial the prefix and a phone number to realize
calling to what your prefix number is mapped. The prefix number
supports at most 30 digits
Destination
Set Destination address. This is optional config item. If you want to
set peer to peer call, please input destination IP address or domain
name. If you want to use this dial rule on SIP2 line, you need input
255.255.255.255 or 0.0.0.2 in it.SIP3 into 0.0.0.3
Port
Set the Signal port, the default is 5060 for SIP.
Alias
Set alias. This is optional config item. If you don’t set Alias, it will
show no alias.
Note: There are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of phone number, which will reduce
dialing number length.
2) all: xxx, it means that xxx will replace some phone number.
3) del: It means that phone will delete the number with length appointed.
4) Rep: It means that phone will replace the number with length and number appointed.
