ZP502 User Manual
17
Please select the proper network mode according to the network condition. ZP502 provide three
different network settings:
3.
Static: If your ISP server provides you the static IP address, please select this mode, then
finish Static Mode setting. If you don’t know about parameters of Static Mode setting,
please ask your ISP for them.
4.
DHCP: In this mode, you will get the information from the DHCP server automatically;
need not to input this information artificially.
5.
PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 3.2.1 Network setting to speed setting your network.
Choose Static IP MODE
，
click
【
NEXT
】
can config the network and SIP(default SIP1)simply,
also can browse too. Click
【
BACK
】
can return to the last page.
Static IP Address
Input the IP address distributed to you.
Netmask
Input the Netmask distributed to you.
Gateway
Input the Gateway address distributed to you.
DNS Domain
Set DNS domain postfix. When the domain which you input can
not be parsed, phone will automatically add this domain to the end
of the domain which you input before and parse it again.
Primary DNS
Input your primary DNS server address.
Alter DNS
Input your standby DNS server address.
Display Name
Set the display name.
Server Address
Input your SIP server address.
Server Port
Set your SIP server port.
User Name
Input your SIP register account name.
Password
Input your SIP register password.
Phone Number
Input the phone number assigned by your VOIP service provider.
Enable Register
Start to register or not by selecting it or not.
