ZP502 User Manual
12
send the number and call the number. When you hear a ringback tone and screen shows the
callee’s number, it shows that the person you called is ringing. If callee answers the call, you can
begin to talk and your phone will keep showing callee’s number and counting time. Press
again to finish talk.
Using directory
Press
in stand-by mode, you will access to phonebook. If there are many persons
records stored in the directory, you can use
&
to select number or press the first
character of the name for searching the person which you want to contact. Press
to
forward
，
and press
to backward. Press Soft2 (Dial) to dial the current number shown on
the screen.
Speed dial
Speed dial means user can make calls directly without hook off or using hands-free. User can dial
number in stand-by mode, but first, user need to add and edit SDial no. By pressing Soft2 (SDial)
to edit and save the number to be a SDial number. In this way, user could make a call only press
the number and Soft3 (Dial).
Multi-line calls
ZP502 supports 3 SIP lines, that is user could use 3 SIP accounts to register and make calls.
System will use SIP 1 as default line to call.
There are most two calls at the same time. Screen will display the incoming call number when
user is keep talking. You can press Soft1 (Answer) to accept it, and hold the first one (if you want
to use this function, you need enable Call Waiting of the phone first). Use Soft1 (Switch) to switch
the two calls to talk.
3.3. End calls
Hang up with handset hook on
Hook on to finish talking.
Hang up with hands-free
Press
to finish talk when phone is in hands-free status.
Note: user can not finish talk by pressing
if phone is used handset to talk.
Hang up a active call with 2 calls
When there are two calls
，
user might use Soft1(Switch)to switch to the call you want to hang up
first. Then press Soft3 (Close) to finish talk, and phone will switch to the other call automatically.
Note
：
it is no use to press Soft3(Close) to finish talk, if there is only one current call.
