Zycoo ZP502 Page 10 User Manual Download

Page: 10 / 58

ZP502 User Manual

6. Press Soft3 (Quit) once return to “

Net Mode

”. Press Soft2 (Save) the screen will show “Saved”

and then jump to show the current net mode.

7. Press

or Soft3 (Quit) thrice return to standby, at this time the phone is trying to

change to PPPoE mode. Press

for checking the status. If the screen shows

“

Negotiating…

” it shows that the phone is trying to access to the PPPoE Server; if it shows an IP

address, then the phone has already get IP with PPPoE.

Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)

Prepare the network’s parameters first, such as IP Address, Net mask, Default Gateway and

DNS server IP address. If you don’t know this information, please contact the service provider

or technician of network.

2. Press

, then press

twice, chooses “

Network

”. Press "OK" or Soft2 (Enter),

LCD screen will display “

WAN

”.

3. Press "OK" or Soft2 (Enter), then choose “

Static

”.

4. Press Soft1Edit) and screen will show “

”, then press Soft1 (Del) to delete. Input your IP

address and press Soft2 (Save) to save what you input. After “

Saved

” shown, the screen will

jump to show the

Net mask

information.

Press Soft1 (Del) to delete. Input your Net mask and press Soft2 (Save). After “

Saved

” shown,

the screen will jump to show the Gateway information

6. P

ress Soft1 (Del) to delete, Input your gateway and press Soft2 (Save). After “

Saved

” shown,

the screen will jump to show the DNS information.

Press Soft1 (Del) to delete. Input your DNS server address and press Soft2 (Save). After

“

Saved

” shown, the screen will return to show IP information.

Press Soft3 (Quit) once, the screen shows”

Net Mode

”. the cursor stay at“

<>Static

”; with

Soft2(Save) pressed

，

the screen shows “

Saved

” and then shows the current net mode.

Press

or Soft3 (Quit) thrice,

return to main interface and at this time the

phone is trying to change to Static mode

. Press

button, the screen shows

“

Static

” .the screen shows the IP address and gateway which were set just now, if the phone

could display the right time, it shows that Static IP mode takes effect.

Setting DHCP mode

Press

, then press

twice, chooses “

Network

”. Then press "OK" or Soft2

(Enter), the screen will show “

WAN

”.

Press "OK" or Soft2 (Enter) to show “

Net Mode

”. Select “

DHCP

”. Press Soft2 (Save), with

“

saved

” shown, screen will jump to show the current net mode.

Press

or Soft3 (Quit) thrice back

to main interface and at this time phone is

Summary of Contents for ZP502



























































Search results

Summary of Contents for ZP502

Reviews:

Related manuals for ZP502

Brands by name

Popular brands

Zycoo ZP502, User Manual

Search results

Summary of Contents for ZP502

Reviews:

Related manuals for ZP502

Brands by name

Popular brands