ZP502 User Manual
11
3. ZP502’s basic operation
3.1. Answer calls
ZP502 will ring to indicate you when there is call incoming
，
below is ways to answer call
：
Answer with hook off
Take handset, you can talk directly. You can just hang up to finish talk
。
Answer with hands-free
Press
to begin talking. Press
again to finish talk
Answer with headset
Press
to answer the call, if the phone detect headset LED will turn to green, when you press
again the phone change to speaker mode. You may press
or Soft3 (Close) to
finish the call.
Using hands-free instead of handset during a talk
Press
and hook on the handset when you use handset to speak and want to change to use
hands-free to speak. Press
again to finish talk.
Using handset instead of hands-free during a talk
Hook off the handset when you want to use hands-free to speak and want to change to use handset.
Just hook on to finish talk.
3.2. Place calls
Using handset
Hook off (screen will show the current using line, or you could press key L1-L3 to select), after
getting dialing tone, you could begin to dial number. After finishing it, press # and ZP502 will
send the number and call the number. When you hear a ring-back tone and screen shows the
callee’s number, it shows that the person you called is ringing. If callee answers the call, you can
begin to talk and your phone will keep showing callee’s number and counting time. Just hang up
to finish talk.
Using hands-free
Press
（
screen will show the current using line, or you could press key L1-L3 to select), after
getting dialing tone, you could begin to dial number. After finishing it, press # and ZP502 will
