Zycoo CooVox T Series Admin & User Manual Download Page 49

Page: 49 / 147

- 43 -

ZYCOO CooVox T-series IP Phone System Admin User Guide v4.0.0

before hanging up.

Quick Send Number

: When enabled, your calls will get through faster, as all numbers sent through this trunk

will always be added with“#” at the end, it will cause the carrier to switch the calls immediately instead of
waiting till digits timeout.

Caller ID Start

: Caller ID detection option for this trunk instead of using global settings. For more information

please refer to

Analog Settings

E1 Trunks

Path:

Telephony -> Outbound Control -> Trunks

If your T600 system has E1 module installed, you’ll have an E1 trunk available for inbound and outbound phone
calls.

Click on the

button to configure the E1 (PRI) trunk when needed.

Call recording

: To enable or disable call recording on the trunk/trunks. To enable recording you have options

to record inbound calls only, outbound calls only or both inbound and outbound calls.

Summary of Contents for CooVox T Series




















































































































































Search results

Summary of Contents for CooVox T Series

Reviews:

Related manuals for CooVox T Series

Brands by name

Popular brands

Zycoo CooVox T Series, Admin & User Manual

Search results

Summary of Contents for CooVox T Series

Reviews:

Related manuals for CooVox T Series

Brands by name

Popular brands