Zycoo CooVox T Series, Admin & User Manual

Page: 80 / 147

- 74 - ZYCOO CooVox T-series IP Phone System Admin User Guide v4.0.0
Module Settings
Notice
Module Settings are only for configuring digital module cards (El/T1, BRI) on T600 IPPBX systems. Ignore this part if
you are using FXS/FXO/GSM modules.
Path:
Telephony -> Preferences -> Module Settings
ZYCOO T600 IPPBX systems need proper module settings to load correct drivers and configure files to drive the E1
and BRI telephony modules.
Default module settings are with module types FXS/FXO/GSM on both telephony module slots. So if you don’t
have E1 and BRI modules installed then you don’t have to configure module settings.
E1 PRI Signaling
E1 module can be installed on both Slot1 and Slot2. To ensure T600 IPPBX can detect and drive E1 module in the
Module Type field you should choose “E1/T1”.
l
Mode : Sets the module to work as E1mode.
l
Clocking Source : Use local or remote as the E1/T1 clock source.
l
Signaling : Sets the module to work with PRI CPE or NET, CPE is used on the client side, NET is used on the
telephony provider side.