Zycoo CooVox T Series, Admin & User Manual

Page: 50 / 147

- 44 - ZYCOO CooVox T-series IP Phone System Admin User Guide v4.0.0
l Overlap Dial : Overlap dialing mode (sending overlap digits).
l
Outbound CID : The number you want to display to the called party.
l
Reset Interval : To set the time in seconds between restart of unused B channels.
l
PRI Indication : To enable this to report Busy and Congestion on a PRI using out-of-band notification.
l
Switch Type : To set the type of PRI switch being used by the telephony provider.
l Prompts Language : Custom a system voice prompts language for the callers calling in from this trunk.
l
Fax Detect : Enable/disable fax detection on this trunk.
l
Fax DST : The extension number of the fax destination. If the extension number is set with an email address,
the fax will be sent directly to the mailbox. If no email address is set, the fax will be sent directly to the fax
machine corresponding to the extension number.
l Dial Permission : Custom dial permission for this trunk, by default it uses the “Extension” dial permission.
Configure only if this trunk is used for PBX integration, so calls coming from the other side can dial out from
this IPPBX trunk directly. DO NOT change unless you fully understand how this feature works.
l
Preferred outbound CID : To set preferred outbound CID of this trunk of the extensions.
l
Quick Send Number : When enabled, your calls will get through faster, as all numbers sent through this trunk
will always be added with“#” at the end, it will cause the carrier to switch the calls immediately instead of
waiting till digits timeout.
SIP Trunks
Path: Telephony -> Outbound Control -> Trunks
Asterisk PBX can be registered as a SIP user agent to a SIP proxy (provider). If you have subscribed to a VoIP service
from an ITSP (Internet Telephony Service Provider), then with the account details provided by them you can
configure a SIP trunk on your CooVox IPPBX system for the user extensions to share and make outbound phone
calls.
To implement your SIP trunk account on the IPPBX system, you’ll need to create a SIP trunk.