43
Quad
r
at R
e
lax
E
N
- MAINT
E
NAN
CE
COLD EXTERNAL
ENVIRONMENTS
With temperatures
below +10° C
at night
when the system is not used, cover the
Quadrat Relax with a special canvas provided
as optional.
If the Quadrat Relax is
m a i n l y u s e d w i t h
external temperatures
below +10° C, we recommend you
connect an exchanger.
WINTER INACTIVITY IN
COLD CLIMATES
In areas where winter temperatures drop
frequently below freezing temperature
,
carry out the following during the period
when the whirlpool is not in use:
1) - Disconnect the main electrical panel.
2) - Empty the Quadrat Relax.
CAUTION:
1) - Eliminate stagnant water on the seats
and on the bottom of the tub with a
sponge,
2) - Remove the residues from the water
circuit: they can be vacuumed with
a vacuum device or swept away by
blowing compressed air through the
hydromassage and intakes nozzles.
3) - Remove and clean the filter cartridges
(see the illustrated steps in the
following pages) and store them in a
dry environment.
4) - Cover the Quadrat Relax to keep it clean.
5) - Before using the Quadrat Relax again,
refer to the pages of this manual once
again.
WINTER INACTIVITY IN
WARM CLIMATES
In hot environments, where the temperature
drops only
occasionally below zero
, the
Quadrat Relax may be left full of water, as
long as it is provided with a frost protection.
Do not disconnect the electrical supply; we
recommend setting the
minimum heating
temperature (15° C
).
0°
C
CLEANING THE “COMPENSATION CHANNEL”
(freestanding version)
To access the “duct” in the “freestanding” version, it is necessary to
lift the whirlpool cover.
4 people are required for this task.
(built-in version)
To access the “duct” in the “built-in” version, it is necessary to lift the
whirlpool cover.,Proceed as shown in the figure.
x
4
