40
Quad
r
at R
e
lax
E
N - U
SE
O
F TH
E
O
TH
E
R
CO
NTR
O
L
S
1
2
3
4
CONTROL FUNCTIONS FROM INSIDE THE QUADRAT RELAX
The temperature of the water cannot be adjusted from
inside the pool
but only using the keypad or remote
control.
USE OF THE INTERNAL KEYBOARD
Setting the temperature
Use the UP/DOWN button to increase/decrease the tempera-
ture value displayed: keeping it pressed
once
, the value
increases
,
keeping it pressed
twice
the value
decreases
. If the temperature of
the water is lower than the pre-set one, the heater will be automati-
cally enabled until the set temperature is reached.
The “heater” LED will light up in the “fixed” mode.
Whirlpool start
Pressing this key:
Once ->
starts the
left nozzles
T
wice ->
starts at the same time the left,
right and front nozzles
Three times ->
starts
the right e front nozzles
Four time ->
the function deactivates.
Blower start
Pressing this key:
Once ->
starts the blower nozzles of the minipool.
Twice ->
the function deactivates.
Chromotherapy start
Pressing this button, chromotherapy is enabled: a sequence
of
5 different colours
starts that are repeated cyclically.
Pressing the button a second time, the sequence is disabled and
the colour displayed at the time the button was pressed is held.
By pressing the button a third time, the chromotherapy function
will turn off.
1 - activation
of the left nozzles (or Milk)
2 - activation of the
blower
3 - switching on/off of the
chrometherapy function
4 - activation of
right
and
front nozzles
