115 / 138
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 50000TL-60000TL-V1
Rev. 1.1 15/03/2021
10.4.
Datalogger
10.4.1.
Preliminary notes on how to configure the datalogger
The AzzurroZCS inverters can be monitored via a datalogger connected to a Wi-Fi network present at the
place of installation or via an ethernet cable connected to a modem.
The inverters are connected in a daisy chain to the datalogger via a RS485 serial line.
Datalogger up to 4 inverters (code ZSM-DATALOG-04): allows to monitor up to 4 inverters.
It can be connected to the network via an Ethernet or Wi-Fi network.
Datalogger up to 10 inverters (code ZSM-DATALOG-10): allows to monitor up to 10 inverters.
It can be connected to the network via an Ethernet or Wi-Fi network.
Figure 77 – Diagram for connecting the ZSM-DATALOG-04 / ZSM-DATALOG-10 datalogger
Datalogger up to 31 inverters (code ZSM-RMS001/M200): allows to monitor up to 31
inverters or a system with a maximum installed power of 200kW.
It can be connected to the network via an Ethernet cable.
Datalogger up to 31 inverters (code ZSM-RMS001/M1000): allows to monitor a maximum of
31 inverters or a system with a maximum installed power of 1000kW.
It can be connected to the network via an Ethernet cable.
Figure 78 – Diagram showing the operation of the ZSM-RMS001/M200 / ZSM-RMS001/M1000 datalogger
