98 / 138
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 50000TL-60000TL-V1
Rev. 1.1 15/03/2021
2)
Final status:
NET (left LED): steady on
COM (central LED): steady on
READY (right LED): flashing on
Figure 56 - Final status of LEDs
If the NET LED does not light up or if the Remote Server A option in the Status page still shows “Not
Connected”, the configuration was not successful, i.e. the wrong router password was entered or the
device was disconnected during connection.
It is necessary to reset the adapter:
-
Press the Reset button for 10 seconds and release
-
After a few seconds, the LEDs will turn off and READY will start to flash quickly
-
The adapter has now returned to its initial state. At this point, the configuration procedure
can be repeated again.
The adapter can only be reset when the inverter is switched on.
