©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
28
The
SETTINGS
menu allows you to configure the printer according to your preferences:
Connectivity options:
Register your device - the tab in which it is possible to register/unregister the printer.
Wi-Fi
- this option allows you to connect the printer to a local network.
Ethernet
- this option allows you to control the Ethernet connection settings.
Zortrax incloud -
this option allows you to connect your printer with your Zortrax inCloud
account.
File sorting
- this option allows you to organize saved files by date or alphabetically.
Language
- this option allows you to change the language of the menu.
Working options:
Resin level control type - here you can set the type of resin level control - automatic or
manual.
Resin level control - this option enables/disables the resin level control in the device.
Wiper - this option enables/disables the wiper in the device.
Buzzer - this option enables/disables the buzzer in the device.
Software autoupdater - this option enables/disables automatic software updates in the
device.
About printer
- this tab contains information which identifies the printer model, its
firmware and hardware version, and serial number. Here you can also check if there are
firmware updates available with the option Check for updates.
Factory reset -
this option allows you to restore your device to default settings.
Select
to choose a model for printing and start the printing process. The printer
will display all information concerning the process on the screen.
