©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
3
Introduction
Read this User Guide carefully and thoroughly before operating the Zortrax Inkspire 2 for the
first time. The User Guide includes basic information about the 3D printer, safety and protection
guidelines as well as advice on preparing the machine for the first printing process and basic
maintenance work. Ignorance and non-compliance with these instructions may result in
property damage, injuries, device failures or lower quality of 3D prints. It is also necessary
to ensure that every 3D printer user knows, fully understands and follows the instructions
provided in this User Guide.
The Manufacturer makes every effort to ensure that Zortrax products are safe in transportation,
installation, usage, storage and disposal. However, given the lack of direct and indirect control
over the device and a number of other factors influencing the device, the Manufacturer is not
responsible for damage, injuries, failures, and costs resulting from improper transportation,
installation, usage, storage, and disposal.
Furthermore, the users should take into consideration the risk of possible damage of the
device resulting from defects in material and workmanship.
The users are responsible for qualifying and determining the intended use of 3D printed
models. The Manufacturer takes no responsibility for any use of printed objects, especially
when those objects constitute a part of safety devices or strictly regulated by specific rules
medical, military or space science equipment.
Due to the size and specificity, the Zortrax Inkspire 2 is not intended for use by minors and by
people with reduced manual, motor and psychomotor skills. The Manufacturer recommends
providing assistance and guidance to people with disabilities and older adults who wish to
operate the printer.
General Safety Information
This User Guide contains important safety directions that should be followed during installation
and operation of the Zortrax Inkspire 2. It also mentions situations which require special
attention and includes warnings against negligence and misuse that could cause damage or
injuries.
Always read the safety data sheets available at:
. They are a source
of basic information and safety procedures for the materials you bought. It is essential to
regularly update the firmware to avoid any kind of failures.
