©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
43
2. Resin vat
Activity
Frequency
Solutions to the problems
Necessary accessories
Cleaning the underside
of the FEP film
Every time
the resin vat
is removed
Soak a paper towel in IPA and
clean the underside of the FEP
film.
-paper towels,
-IPA,
-safety gloves
Checking if there are
residues of cured resin
in the vat
Before each
printing
process
Use a plastic spatula and slightly
mix the resin to check if there are
any residues in the liquid.
-a plastic spatula,
-safety gloves
Checking if there are
residues of cured resin
on the FEP film
Before each
printing
process
Empty the resin vat. If there are
any residues of cured resin on
the FEP film, remove them using
a plastic spatula.
-a plastic spatula,
-safety gloves
Emptying and cleaning
the resin vat
Every time
the resin
type
or color is
changed
Run the
Clean printer
procedure
from the menu and follow the
instructions displayed on the
screen.
-bottle of resin,
-paper towels,
-a plastic spatula,
Replacing the FEP film
Once the
FEP film
becomes
bent, de-
formed, or
perforated
Follow the instructions in the
manual:
-a new FEP film,
-a screwdriver,
-paper towels,
-IPA,
-safety gloves
