zortrax Inkspire 2 User Manual Download | Manualshive

Page: 27 / 53

background image

©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.

27

Navigating through the Menu

The main menu is divided into four submenus:

HOME

,

TOOLS

,

SETTINGS

and

PRINT

.

Navigating through the menus and activating or deactivating the printer’s functions and
settings is possible through the touchscreen.
The

HOME

menu displays all relevant information about the printer and its current state:

IP address, the type of connection to a local network (Wi-Fi or Ethernet), the type of resin
present in the vat, and storage used on the USB flash drive.
The

TOOLS

menu contains several options useful during the printing process and

maintenance work:

Material

- this option allows you to choose the type of resin you’re going to use.

Platform

- this option allows you to change the position of the platform. You can either

move the platform (up or down) or set it in the home position.

Calibration

- this option activates the procedure of platform calibration.

Resin level control system - the submenu with all options useful to manage the resin level
system:
Level sensor calibration - this option allows you to perform resin sensor calibration.
Material weight sensor calibration - this option allows you to perform calibration of the
material weight sensor.
Control pump -

this option allows you to load resin from the bottle placed in the bottle

holder, unload resin from the vat, and run the wiper.

Clean printer -

this option allows you to run a five-step procedure of cleaning the resin vat,

FEP film, and resin pump. All instructions are provided on the screen during the processes.

Lamp test

- this option allows you to check the UV lamp for proper operation.

Fans test

- this option allows you to check the printer’s fans for proper operation.

Device warnings

- this tab displays all warning notifications that have occurred while using

the printer.

Maintenance - this tab displays all maintenance activities that have to be performed on the
printer.

«
...
25
26
27
28
29
...
»

Summary of Contents for Inkspire 2






















































Reviews:

No comments

Related manuals for Inkspire 2

Brand: Labau Pages: 19

Brand: WANHAO Pages: 5

Brand: Wang Pages: 24

Brand: Samsung Pages: 115

Brand: Oki Pages: 2

Brand: J&Maya Pages: 21

VarioPrint 6180

Brand: Oce Pages: 306

Brand: Brightek Pages: 8

Suprasetter 106

Brand: HEIDELBERG Pages: 91

LaserPro X500 III-80Y

Brand: GCC Technologies Pages: 127

CraftBot PlusPro

Brand: CraftUnique Pages: 2

Brand: 3D Systems Pages: 72

Brand: Fujitsu Pages: 143

Brand: Fujitsu Pages: 2

Virtuoso SG400EU

Brand: Sawgrass Pages: 135

1000 Color Jetprinter

Brand: Lexmark Pages: 56

Aficio MP W3600

Brand: Aficio Pages: 12

Brand: TECLABEL Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands