QUICK START
GDP-32
24
Section 4, Page 17
September 2015
4.13
ACQUISITION CONFIGURATION
Along the left border of the screen are parameters that configure data acquisition. Not all
programs contain all the fields listed below, some programs contain additional fields, but all the
fields in this portion of the screen should be inspected and modified if necessary.
FREQ
Select the frequency to analyze.
CYCL
Set the number of cycles to average.
STACKS
Set the number of repetitions of data acquisition to perform. Each stack will
be recorded as its own block of data in the cache.
GAIN
Configure gaining to be automatic for the first stack, manual setting, or SP
only.
NOTCH
Notch filter setting for all the channels.
SENSE
The value of the sense resistor, if a reference channel has been defined.
TX CUR
The transmitter current. This will be set automatically set if a reference
channel has been defined.
