GDP-32
24
INSTRUCTION MANUAL
September 2015
Section 4, Page 22
GDP-32
24
4.18
DATA TRANSFER TO A COMPUTER
Data files can be transferred to a PC or laptop computer through a 100BASE-T Ethernet
connection, wired either directly or through a network. Standard network protocols are used. PC
or laptop firewall and network connection settings may need to be configured, and are beyond
the scope of this manual.
DIRECT CONNECTION TO PC OR LAPTOP
Connect the computer to the receiver with a “crossover” cable available from Zonge or many
computer vendors.
From the Zonge Logo screen, press
to start the connection.
<0418a_GDPNET_ManualStart>
Enter an IP address consistent with the address of the PC or laptop. The first 3 octets for the
receiver address should be set to match those of the computer. The last octet for the receiver
should be different from the computers. The Subnet Mask for both should also match, and is
generally 255.255.255.000.
Note: To obtain the IP address of a Windows computer, click the Start icon, type “
cmd
” on the
command line, and press enter to start up a command box. In the command box, type
“
ipconfig
”. The IPv4 address given for the Ethernet adapter Local Area Connection,
should work.
Press
to initiate the connection. If a network socket is successfully opened the GDP's
Folder name will be displayed, for example:
Enter
