GDP-32
24
INSTRUCTION MANUAL
September 2015
Section 4, Page 6
GDP-32
24
<0403a_24CR_Cal>
Calibration is not required each time the GDP-32
24
is started. Calibrate data are stored on the
GDP flash drive. Frequent calibrates, especially as the environment changes, will provide the
best results. Refer to
Section 6, Setup
, and the sections for specific programs, for more
information about calibration, and when to use METHOD 1SHOTCAL, MODE INTERNAL,
and when to set gain values.
Note: Calibration should only be performed without a charger. Nothing should be connected to
the input channels, or the CAL output terminals, unless MODE EXTERNAL has been selected.
