GDP-32
24
INSTRUCTION MANUAL
September 2015
Section 4, Page 2
GDP-32
24
4.1
INTRODUCTION
This section covers the basic startup procedure. Use this summary to test the basic functions of
the receiver without having to be intimately familiar with its operation. More complete
operating instructions are available for each topic in later sections of this manual.
This overall procedure is required in order to acquire good data with the GDP-32
24
.
1.
Receiver Startup
2.
Calibration.
3.
System Check
4.
Timing Card Synchronization
5.
Field Survey Program
Enter Survey Parameters
Check Field connections
Acquire Data
Check Data
6.
Transfer Data
Simple menus make operating the GDP-32
24
straightforward. The easiest way to become
familiar with the receiver operation is to try the various software options.
MAIN DISPLAY
The screen provides 80 characters on 30 lines. The entire screen is visible on the Color display.
However, 60 characters on 20 lines are visible on the Monochrome display. Use the
key
and one of the quadrant keys to shift the display to another area:
+
For example, shift the display down by using
, and back up with
.
Only the first diagram below shows the entire screen. MOST OF THE OTHER SCREENS IN
THIS MANUAL DISPLAY ONLY 60 characters BY 20 lines.
Home
SELECT UP
Pg Up
PREV F IELD
SELECT DN
End
Pg Dn
NEXT FIELD
SELECT DN
End
Home
SELECT UP
