ZOLL Propaq MD, Operator'S Manual

Page: 21 / 326

Propaq MD Indications for Use
9650-0806-01 Rev. D Propaq MD Operator’s Guide 1-9
ECG Monitoring
The Propaq MD is intended for use to monitor and/or record 3-, 5-, or 12-lead ECG waveform
and heart rate, and to alarm when heart rate is above or below limits set by the operator. The
patient population will range from newborn (neonate) to adult, with and without heart
dysfunction.
CPR Monitoring
The CPR monitoring function provides visual and audio feedback designed to encourage
rescuers to perform chest compressions at the AHA/ERC recommended rate of 100
compressions per minute. Voice and visual prompts encourage a minimum compression depth
of at least 1.5 (3.8 cm) or 2.0 inches (5.0 cm), depending on the configuration, for adult
patients. The CPR monitoring function is not intended for use on patients under 8 years of age.
External Transcutaneous Pacing
This product can be used for temporary external cardiac pacing in conscious or unconscious
patients as an alternative to endocardial stimulation.
The purposes of pacing include:
•
Resuscitation from standstill or bradycardia of any etiology:
•
As a standby when standstill or bradycardia might be expected:
•
Suppression of tachycardia.
•
Pediatric pacing.
Non-Invasive Blood Pressure Monitoring
The Propaq MD is intended for use to make non-invasive measurements of arterial pressure and
heart rate, and to alarm if either parameter is outside of the limits set by the user. Measurements
are made using an inflatable cuff on the patient's arm or leg. The patient population will range
from newborn (neonate) to adult.
Temperature Monitoring
The Propaq MD is intended for use to make continuous temperature measurements of rectal,
esophageal, or surface temperatures, and to alarm if the temperature is outside of the limits set
by the user. The patient population will range from newborn (neonate) to adult.
SpO
2
Monitoring
The Propaq MD pulse CO-oximeter, with Masimo Rainbow
®
SET
®
technology and the
Rainbow series of sensors, is intended for use for continuous noninvasive monitoring of
functional oxygen saturation of arterial hemoglobin (SpO
2
), pulse rate, carboxyhemoglobin
saturation (SpCO), and/or methemoglobin saturation (SpMet). The pulse CO-oximeter and
accessories are indicated for use on adult, pediatric, and neonatal patients during both no