ZOJE ZJ5820, Operating Manual

Page: 107 / 108

10. Appendix 1
Malfunction
Name of Malfunction Method for Settlement
code
1 、 Check the connection of emergency stop switch
E-040 SPI communication busy
Turn off machine and check the device as below ：
1
、
Check the cable connection between the
stepping board and main controller
；
2
、
Check the stepping board
E-041 Stitch signal error
Turn off machine and check the device as below ：
1 、 Check the installation of main shaft ；
2 、 Check the installation of upper needle sensor ；
3
、
Check the cable connection and the working
condition of upper needle sensor.
E-042 X motor busy
Turn off machine and check the device as below
：
1 、 Check the cable connection between the
stepping board and main controller
；
2
、
Check the stepping driving board
；
E-043 Y motor busy
Turn off machine and check the device as below
：
1 、 Check the cable connection between the
stepping board and main controller
；
2
、
Check the stepping driving board
；
E-044 Z motor busy
Turn off machine and check the device as below ：
1
、
Check the cable connection between the
stepping board and main controller
；
2 、 Check the stepping driving board ；
E-045 Pattern stitch number error
Turn off machine and check the device as below
：
1
、
Check the setting of pattern parameters
；
2 、 Check the cable connection between panel and
main control box.
E-046 Main-shaft speed abnormal
Turn off machine and check the device as below
：
1 、 Check the cable connection of main-shaft
motor
；
2
、
Check the main motor
；
3
、
Initialize the main motor again
。
E-047 No encryption device Turn off machine. Update the program again.
E-048 Wrong password 1 Turn off machine. Update the program again.
E-049 Wrong password 2 Turn off machine. Update the program again.
E-050 Low pressure
Turn off machine and check the device as below
：
1 、 Check the installation of air pressure test switch
2 、 Check the cable connection of air pressure test
switch
；
3 、 Check the working condition of valve. Make
sure the valve switch opens normally
98