ZOJE ZJ5820, Operating Manual, Page: 100 / 108

10. Appendix 1
Content No. Name
M-028 USB is pulled out USB is pulled out
M-029 Save software version successful
Software version is saved to the root directory
of U disk
M-030 Counter at set value
Press ENTER to release it
M-031 Over sewing range
Please make sure the pattern is within the
sewing range
M-032 Stitch number over range
Please reduce patter stitch number
M-033 Load default patterns
No pattern in memory, please load default
patterns
M-034 Pattern data error
Current pattern data error, it will be replaced by
default patterns
M-035 Pattern information file open failed Restore to default pattern configuration
M-036 Restore to default setting
Press Enter to perform operation; Press ESC to
quit
M-037 Parameter recovery successfully
Successful recovery of parameter. Please restart
machine
M-038 Restore all the settings Are You Sure ？ Yes ： enter No ： X
M-039 Restore the selected items Are You Sure ？ Yes ： enter No ： X
M-040 Not select an item Please select one or several parameters
M-041 Successful
Current operation is successful
M-042 Failed Current operation is failed
M-043 Initialize U disk
Press Enter to perform operation; Press ESC to
quit. The initialization will delete all the files in
U disk
M-044 Initialize memory
Press Enter to perform operation; Press ESC to
quit. The initialization will delete all the files in
memory
M-045 Please turn off machine
Current operation is finished, please restart
machine
M-046 Not select update item Please select at least one item for update
M-047 Selected item for update is not existed
If the item has no update file, the system will
cancel the selection. If user wants to update the
rest, please confirm again
M-048 Update successful Update successful, please restart machine
M-049 Copy failed Check the room of memory
M-050 Copy failed,
Check whether the U disk is pulled out
M-051 Not select update item Please select at least one item for update
M-052 File I/O error File I/O error
M-053 Parameter transfer
Are You Sure
？
Yes
：
enter No
：
X
M-054 Pattern-designing data error
91