ZOJE ZJ5820, Operating Manual

Page: 29 / 108

5. Basic Operating Instruction
5-2 Basic Operation
①
Turn on Power
After user turns on the power, the system will
display the contents at below in order at the Pattern
Data Display Area
：
Welcome to using SC511 Buttonhole Machine
→
SC511-00
（
01or 02
）
→
Create Data
→
Please Start
Switch.
Note
：
If figure A “EB012” is displayed on the
operation panel when user turns on the power supply,
please turn the wheel (1) in the directions shown in
figure B and make the print (2) face to the gap (3)
directly.
（
A
） （
B
）
②
Step Pedal for Start
After user stepped the right pedal for start, the
feeding board will move to the position where the
cloth is located. In the operation panel, the readiness
status of the previous operation mode (it might be
Auto Mode, Manual Mode, Test Mode, Cycle Mod
Program Mode) will be displayed.
e or
Note
：
The “Readiness Status” is the status before
the next action when the system moves to a mode.
20