ZOJE ZJ5820, Operating Manual

Page: 43 / 108

6. Instructions on Sewing Operations
6-2 Manual Mode
Due to the knife will act during the manual sewing, please keep hand away from
the knife. Otherwise the operator may suffer serious injury.
Under manual mode, turn the wheel to
move the cloth-feeding board in stitch by stitch.
This will simplify the operation in synchronizing
adjustment of yarn-divider.
①
Press Manual Mode
Shape of Sewing Stitch Form (1), Pattern
Code (2), Knife Action (3), Total Stitch Number
(4) and Leftover Stitch Number (5) are shown in
the sewing data display area.
②
Press to select the wanted
pattern code (2).
The pattern code (2) will change in the
following sequence: P01
→
P02
→
… P20
→
C1
→
C2…C9 at each pressing on .
（
Press
to change the code in contrary direction.
）
③
Lay the fabric for sewing under the presser,
step the presser pedal (6) to lower the
presser.
④
Step start pedal (7) to move the
cloth-feeding board to the position of
sewing start.
Caution
：
When setting the knife action as
“Cut-before-Sewing”, the operator shall look out
for his hand at knife moving.
34