ZOJE ZJ5820, Operating Manual

Page: 42 / 108

6. Instructions on Sewing Operations
6. Instructions on Sewing Operations
6-1 Auto Mode

For the automatic sewing at first time, do please
perform the trial sewing.

When using SC511 in the environment with low
temperature, user shall perform the trial sewing
for several times, so as to warm up the motor.
①
Press Auto Mode Key
Press to show the Shape & Length of
sewing stitch: Pattern Shape (1), Pattern Code (2),
Knife Action (3), Sewing Speed (4) and Total Stitch
Number of Existing Pattern (5) at pattern data display
area, as well as the Number of Production (6) at
Production Counter Key.
②
Press to select the wanted pattern code
(2). The pattern code will change in the following
sequence: P01
→
P02
→
…P20
→
C1
→
C2…C9 at
each pressing on . Press to change the
code in the contrary direction.
③
Select the wanted action of knife (Non-Cut/
Cut-before-Sewing/Cut-after-Sewing).
Note: For the detailed shift method of Knife
Action, please refer to
【
2.5 Shift of Knife Actions
】
④
Lay the fabric for sewing under the presser, step
the presser pedal (7).
⑤
Step the start pedal (8) to start the sewing
⑥
For sewing repetition, please repeat the operation
in the 4
th
& 5
th
steps at above.
33