ZOJE ZJ5820, Operating Manual

Page: 59 / 108

7. Interface of Parameter Setting Mode
④
Check the changed parameter
A
、
When parameter is changed, the system
will display “Modified” key at parameter
setting interface.
B
、
In the parameter setting interface, press
【
Modified
】
to check the changed
parameters.
At first, the system will ask user to input
the password. For the operation at
password input interface, please refer to the
“A” at
②
. After inputting the right
password, user can enter the interface for
inquiring changed parameters.
C
、
Under the interface of changed parameter
inquiry, user can find the list containing all
the changed parameters with their current
value and default value.
In that interface
：

Press
【
All Rest
】
will restore all the
changed parameters to their default
values

Click Parameter Name, like
【
Limit
maximum cut Space
】
and then press
【
Select Rest.
】
to restore this
parameter to the default value. User
can select many parameters at here.

Press Parameter Number, like
【
U453
】
to enter the parameter setting
interface, where user can reset the
parameter value.
7-6-2 List of Parameters at U Level
No. Functions Description Range Changing
Step
Default
Setting
U001
1
Pedal/2 Pedals
Switch
0
：
Single Pedal
（
Simulation
）
1: Step the start pedal to lower the
presser, and the sewing machine
starts.
2
：
Press the presser switch to
lower the presser. Then step the
start pedal to start the sewing
machine.
0~2 1 2
U051
Delay time before
cut for 1 Pedal
model
For automatic sewing in
Cut-before-Sewing mode, this
parameter will determine the
delay time of knife action after
the pedal 1 is stepped
0~800 50ms 0
U056
Lower clamp
when move front
0
：
OFF
After sewing, the cloth-feeding
board moves to the position set
before with the presser at up
position; the presser keeps up at
searching the original
0~1 1 0
50