ZOJE ZJ1900DSS, Manual

Page: 90 / 146

COMPUTER-CONTROLLED HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
- 19 -
C . Press and trim the thread. After that, press again to return to the origin.
9 . Set P pattern & C pattern
9-1. Use Pattern Key
（ ）
for Sewing
The saved patterns (No.1~200) can be registered on P1~P50. It is possible to change and
register the scale rate, Max speed limitation and sewing position. With the rolling window of
pattern, user can also register patterns and has access to the pattern from P1~P25 at a time.
· For selecting P6~P25, user can use the combinations of
(simultaneous pressing) shown in the below table at his sewing.
P-No
.
Selection
Key
P-No. Selection
Key
P-No. Selection
Key
P-No
.
Selection
Key
P1 P1 P8 P1+P4 P15 P4 +P5 P22 P2+P3+P4
P2 P2 P9 P1+P5 P16 P1+P2+P3 P23 P2+P3+P5
P3 P3 P10 P2+P3 P17 P1+P2+P4 P24 P2+P4+P5
P4 P4 P11 P2+P4 P18 P1+P2+P5 P25 P3+P4+P5
P5 P5 P12 P2+P5 P19 P1+P3+P4
P6 P1+P2 P13 P3+P4 P20 P1+P3+P5
P7 P1+P3 P14 P3+P5 P21 P1+P4+P5
.Registration on
⑴
pattern key
Exp
：
Register pattern No.3 to P2, X scale rate: 50%; Y scale rate: 80%; Max speed limitation:
2000 rpm, pattern position: 0.5mm to the right and 1mm to the front.
1).
Turn on the power, press
(the sewing LED shall be off
at this moment) to have access to
Mode Setting (Setting of Storage
Switch).
2). Use & to display the
storage mode of pattern
3). Press to have access to the
pattern storage mode.