ZOJE ZJ1900DSS, Manual

Page: 112 / 146

COMPUTER-CONTROLLED HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
- 41 -
No. Definition Adjustment Range Initial Value Remarks
135
Presser action order before
sewing start
0: After origin is found
in X/Y axis,the presser
will move to the sewing
start point and then go
down to press the cloth;
0
138.1
Thread tension control
method
0: Thread-catching
Method
1
241.0
Machine type
CP--- System Test Mode
The parameters above are only for the repair technicians, and ordinary
users are forbidden to change those parameter
1: After origin is found
in X/Y axis,the presser
will stop at the origin.
If user steps the pedal to
level 1,the presser will
go down at origin and
press the cloth; If user
steps the pedal to level
the presser will move to
the start sewing point
and strat the sewing;
1: Thread-standing
Method
150.0
Set the safety switch to
be invalid
0: Nomal
1: Invalid
0
0: Bar-tacking
5: 60×40
7: Button sewing
0
2: At sewing start,the
action is as same as in
“1”.The only difference
is at the sewing end,
which is that the end
point.After user steps
the pedal to level 1,the
presser will return to
origin and go up.