ZOJE ZJ1900DSS, Manual

Page: 85 / 146

COMPUTER-CONTROLLED HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
- 14 -
.Setting of Limitation on Max Speed
⑸
⑹ .
Setting End
·Press to record the set values like pattern number, X/Y scale rate and so on.
·Press to reconfirm each set item, but the Sewing LED can’t changes its status.
·Press to turn off the Sewing LED, then each set value of item can be changed
·When the pattern number is 0 (the default setting), pressing will activate the error
“E-10”. At this time, please press the Reset Key to reconfirm the pattern number.
1) Press , and then the LED of
will be displayed.
2) Press & to display
400 at Data Display LED
（
The limitation is set as 400rpm
）
1) Press .
2)
After the presser goes up, the
Sewing LED is on. At this
time the system is in the
sewing status.
When the presser is raised, be careful that fingers are not caught in the presser since the
presser moves after having lowered.
When turning OFF the power without pressing key, the set values of pattern No.,
X/Y scale, number of max. rotation, and thread tension are not memorized.