ZOJE ZJ1900DSS, Manual

Page: 78 / 146

COMPUTER-CONTROLLED HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
- 7 -
［ 4 ］
OPERATION OF THE SEWING MACHINE
1. Lubrication
Check that the place between lower line
Band upper line A is filled with oil . Fill there
with oil using the oiler supplied with the
machine as accessories when oil is short.
*The oil tank which is filled with oil is only
for lubricating to the hook portion. It is
possible to reduce the oil amount when the
number of rotation used is low and the oil
amount in the hook portion is
excessive.(Refer to 8.Amount of oil supplied
to hen kook of [7] maintenance
1. DO not lubricate to the places other than the oil tank and the hook of Caution 2 below.
Trouble of components will be caused.
2. When using the sewing machine for the first time or after an extended period of disuse
use the machine after lubricating a small amount of oil to the hook portion.(Refer
to2.Adjusting the needle-to-shuttle relation of [7]MAINTENANCE
Turn of the power before starting the work so as to prevent accidents
caused by abrupt start of the sewing machine
A
B
8. Installing the thread stand
The line frame in the accessory
box should be installed in Table.