ZOJE ZJ1900DSS, Manual

Page: 76 / 146

COMPUTER-CONTROLLED HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
- 5 -
4. Installing the drain receiver
Fix drain receiver in the installing
②
hole of table wit
①
h four setscrews .
③
Screw in drain bin to drain
④
receiver . Insert sewing machine
②
drain pipe into drain bin .
⑤ ④
Insert drain pipe until it will
⑤
go on further so that it does not
come off drain bin when
④
tilting the machine head
1
4
2
5
5
2
3
5. Tilting the sewing machine head
turn head gently down , and leaning
①
the head on the head supporting bar at .
②
1. Before tilting the sewing machine
head, make sure that head support
rod
is attached to the machine
①
table
；
2. When raising the sewing machine
head, do not raise it while holding
motor cover .It will be the cause
②
of breakage of motor cover .
②
3. Be sure to tilt the sewing machine
head on a flat place to prevent it
from falling.
1
2
6. Installing the operation panel
Use four wood screws fix the operator
①
panel on the table
②
in a comfortable
③
operation position, then the operator panel
②
corresponding wire hole through the table ,
③
and then dock with the other side.