23
❺ Use
5.1 I User interface
• Before starti ng the appliance's chlorinati on functi on, make sure that all of the salt added to
the pool has dissolved fully.
* The interface graphics may vary according to model
Blue indicator on:
Water conducti vity too low (lack of salt,
water too cold, worn cell, etc.)
Blue indicator on or blinking:
See informati on or acti on to perform on-
screen.
Acti vate/Disable Low mode manually :
Reducti on in chlorine producti on from 0%
to 30% in 10% intervals (adjustable from
the dedicated MENU).
"LOW MODE ON" message displayed.
On
(press and release)
/ Off
(press and
hold)
/Standby
(press and release)
Acti vate BOOST mode :
Chlorine producti on at 100% for a
cumulati ve 24 hours. "BOOST ON"
message displayed on the screen with the
ti me remaining.
User menu
Setti ng parameters.
• Arrows
:
-
Browse a menu
-
Increase or reduce a setti ng value
-
Lock/Unlock the user interface
(Simultaneously press both butt ons for
four seconds).
Butt on
:
-
Confi rm the highlighted selecti on
-
Clear an error message that requires
operator acti on (press for four seconds)
Enable the Wi-Fi Direct mode
to connect to the iAquaLink™ applicati on
(depending on model)
(Press both butt ons simultaneously for
four seconds).
The
indicator lights.
*
5.2 I Setti ngs required prior to use
5.2.1 Starti ng the appliance
• Press
to switch the appliance on.
•
On start-up, the following appliance informati on is displayed:
5.2.2 Setti ng the language
•
The fi rst ti me the system is started, the list of languages is displayed. Simply select the language required
with the butt ons
. Confi rm the selecti on by pressing
.
•
To modify the language later, press
and scroll using the
butt ons.
•
Confi rm the selecti on by pressing
.