13
2.5.4 Connecti ng a Zodiac® variable speed fi lter pump (in depending to the model)
The Zodiac® variable speed fi lter pump must be connected in 2 places:
- Mains supply to the «PUMP 230 V» connector.
- RS485 cable (supplied with the pump) to the appliance’s «VSP RS485» connector in the following order:
GREEN
YELLOW
BLACK
RED
RED
BLACK
YELLOW
GREEN
On the salt chlorinator
On the fi lter pump
•
Ensure the pump switches are in the correct positi on :
2.5.5 Reassembling the appliance
•
Positi on the lower protecti on cover (or the pH Link/Dual Link module) onto the control box and screw
down the two side screws (illustrati on
).
•
Snap the cosmeti c cover over the control box, (illustrati on “
a” or “
b” depending on the model).
a
b
• In a pH Link or Dual Link module is installed, do not reconnect the electricity supply unti l the
module, the POD kit and the pH minus injecti on pipe have been installed.
