MF620C to SMF IC620 Conversion Instructions
Page 1
1
3
2
4
Selecto, Inc.• 3980 Lakefield Court • Suwanee, GA 30024 USA • 800-635-4017 • 678-475-0799
a.) Turn water supply “Off”.
b.) Relieve pressure by turning the 3-way valve to the
“Drain” position or pushing the “Red” pressure relief
button.
c.) Remove sumps & cartridges using existing sump
wrench. Recycle old wrench and sumps responsibly.
a.
c.
b.
a.) Carefully clean any old lubricant and dirt from inside of
the heads.
b.) Remove old cartridge identification labels from both
heads.
a.
b.
Apply lubricant (supplied)
to O-Rings of SMF Adapters
a.) Install (3) SMF Adapters into heads, hand tight.
b.) Engage “Ears” of wrench (supplied) into SMF Adapters.
c.) Lightly tighten by turning “clockwise” when viewed
from bottom.
DO NOT OVER TIGHTEN!
a.
b.
c.
#803-025
Rev. 04-13-09
