16
3.1.3 Installing the POD kit on the pipe
•
Click the 2 parts of the POD kit together around the pipe. For a 50 mm diameter pipe, use the adapter
marked 'EU'. Do not use this adapter for a 63 mm diameter pipe,
see illustrati on
.
•
Install the lower and upper pipe shells from the POD kit onto the pipe so that they match up with the
locati on of the holes and the directi on of the water fl ow (follow the directi on shown by the arrows),
see
illustrati on
.
•
Positi on the upper part with its various components in the directi on shown by the fool proofi ng. Align the
dot
on the clamping ring with the arrow
on the lower pipe shell and ti ghten down the clamping ring
(by hand only!),
see illustrati on
.
•
To see whether the ti ghtening is correct, check that the clamping ring is level,
see illustrati on
.
Pipe adapter, 50 mm diameter (“EU” markings)
Lower clamp, 63 mm diameter
INLET
OUTLET
Water circulati on directi on
Fool proofi ng
EN