background image

Start / Stop Cleaning

The factory default cleaning mode is Floor/Walls/

Waterline. 

Use 

 to change cleaning surface setting.

Toggle between modes:  

Floor Only 

 

(1h 15 min) Floor only

Floor/Walls/Waterline 

 

(2h 30 min) 

 

Floor, walls, waterline

With the cleaner submerged in the water, 

press 

  to begin operation.

Press again to interrupt and cancel an in-progress 

cleaning cycle.

NOTE

:   The Control Unit automatically goes into standby 

mode after 5 minutes and the display screen turns 

off. Press any key to exit standby mode and view 

remaining cycle time. Cleaner will continue to 

function in standby mode.

Lift System

The Lift System is designed to assist in retrieving 

the robot from the pool.  Lift System can be 

activated at any time during or after a cleaning 

cycle.

1.  Press 

 on the Control Unit or 

from the App (connected models) to begin 

the automated procedure to bring the 

cleaner to the wall.

NOTE

:  To stop the procedure at any time, press and 

release the button again.

2.  Next, Press and HOLD 

 to rotate the 

cleaner.

3.  Once the cleaner is facing the wall of your 

choice for retrieval, release the button.

4.  Cleaner will drive forward and up the wall 

it is facing. It will wait at the waterline to be 

retrieved.

5.  When in reach, remove the cleaner from 

the pool using the handle. The cleaner 

will quickly expel water to allow for lighter, 

easier removal.

NOTE

:  Never lift the cleaner out of the pool by the floating 

cable.

Figure 14.  Always remove cleaner using the handle

Page

 12 

  

Zodiac

®

 Duo-X

 Robotic Pool Cleaners   

|

   Owner's Manual

Summary of Contents for Duo-X DX4000

























Reviews: