background image

1

 Important Safety Instructions

 

Please read through the entire manual before installing your new robotic pool cleaner. The cleaner must 

be installed and operated as specified.

 

 

WARNING

Failure to comply with the following warnings can increase risk of fire or electrocution which 

can result in property damage and serious injury, including loss of life.

PREVENT ELECTRICAL SHOCK

To reduce risk of electrical shock:

•  The cleaner is to be installed in accordance with the relevant requirements of the Australian wiring 

rules AS/NZS 3000. Also refer to the installation instructions relating to the swimming pool equipment 

for which the cleaner will be an integral part. The cleaner is to be supplied through a Residual Current 

Device (RCD) with a rated residual operating current of 30mA.

•  Do not enter pool while the robotic cleaner is in water.
•  Do not bury cord. Locate cord so as to prevent it from being damaged by lawn mowers, hedge trim-

mers and other equipment.

•  To reduce the risk of electrical shock, do not use the robotic cleaner or Control Unit if the cord is worn 

or damaged. Contact Zodiac Customer Care Service 1300 763 021  immediately for proper servicing 

and replacement of the damaged cord.

•  Double insulation—For continued protection against possible electric shock, use only identical re-

placement parts when servicing. Do not attempt repair of the robotic cleaner, Control Unit, power cord, 

or floating cable.

•  Use only the power supply provided with the product.
•  NEVER OPEN Control Unit.
•  DO NOT USE AN EXTENSION CORD TO CONNECT THE UNIT TO ELECTRIC SUPPLY; PROVIDE 

A PROPERLY LOCATED APPROVED ELECTRICAL OUTLET. THE CONTROL UNIT SHOULD BE 

PLACED NEAR THE APPROVED RECEPTACLE BOX.

PREVENT CHILD INJURY AND DROWNING

•  To reduce the risk of injury, do not permit children or persons with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge to operate this product.

•  Do not let anyone, especially small children, sit, step, lean, or climb on any equipment installed as part 

of your pool’s operational system.

 

Page

 4 

  

 

Zodiac

®

 Duo-X

 Robotic Pool Cleaners   

|

   Owner's Manual

Summary of Contents for Duo-X DX4000

























Reviews: