Zipro Dunk, User Manual

Page: 28 / 163

28
EN
STEP 4.
Fix the front column bottom cover (58) to
the front column (4). Connect the computer
cable (59) to the connecting cable (60).
Fix the front column (4) to the main frame
(1) with Allen bolts M8x16 (22), curved
washers (61), and flat washers (23).
STEP 5.
5a. Slide horizontally the long axle (56)
into its opening under the front column
cover (51a/b). Put the left and right
handle arm (7L/R) on the long axle (56)
with Allen bolts M8x16 (22), spring
washers (25), washers (21), and flat
washers (24).
Do not tighten all the elements yet.
5b. Put the rear parts of the pedal base
(8L/R) on the crank (20) with hexagonal
bolts M10x20 (26), spring washers (18)
and flat washers (27).
Do not tighten all the elements yet.
5c. Screw the left and right handle arm
(7L/R) to the left and right pedal base
(8L/R) with bolts M8x80 (37), flat washers
(12) and locknuts (13). Install the pedal
base caps (31) and tighten all
the elements.
5d. Install the left and right pedal
(34L/R) on the left and right pedal base
(8L/R) with hexagonal bolts M8x45 (33)
and flat washers (12).
NOTE! The right pedal is marked ‘R’
and the left pedal is marked ‘L’.