Page 2 of 20
Hydro Tap Installation and Operating Instructions - 86682 - March 2012 v1.05
Before Installation:
A.
Read the instructions
B.
Note: Not all fittings are supplied with the appliance kit. Isolation valves are
not supplied
C.
Check the water pressure to determine if you require a pressure reduction
valve or a flow restrictor added or removed from the kit.
D.
Check the water quality to determine if extra filtration will be required.
E.
Check the appliance rating plate and ensure correct power is available for the
appliance.
F.
Check the under counter cupboard supporting the appliance is adequate for
the total weight of the appliance, when full of water.
Before Commissioning:
1.
Check the unit has been installed correctly.
2.
Check all plumbing fittings have been tightened.
3.
Ensure the outlet and vent pipes are positioned to drain correctly.
4.
Ensure there is adequate ventilation.
5.
Check all tubes from the undersink unit to the tap, have a constant rise and
there are no sags or kinks in the hoses.
6.
Check all electrical connections are correct and there are no loose wires.
Commission:
7.
Flush the supply line before connecting.
8.
Turn on the water and check for leaks.
9.
Flush the filter.
10.
Programme (select electronic models) to suit the customer’s requirements.
Installation Checklist
