Page 14 of 20
Hydro Tap Installation and Operating Instructions - 86682 - March 2012 v1.05
Safety Lock (boiling / chilled models)
The safety lock can be activated to prevent boiling
water flowing if the hot lever is inadvertently activated.
To activate
, first press the safety lock then depress the
Blue Chilled water lever for a period of approximately ten
seconds. The safety lock indicator light will now be illuminated.
To de-activate
, first press the safety lock then depress the
Blue Chilled water lever for a period of approximately ten
seconds. The safety lock indicator light will now extinguish.
To operate when the lock is ON
, depress both the Red lever
and the safety lock simultaneously.
Safety Lock (boiling only models)
To activate the safety lock, go to the LCD display, using menu
>
or
>
buttons, scroll to the Safety Lock display. To turn ON adjust
>
button, to turn OFF adjust
>
button. After about 10 seconds
the screen will default to the selected mode. When activated the
LED on the safety lock will be illuminated. If de-activated the
LED will be OFF.
To operate when lock is ON,
depress both the Red lever and
the safety lock simultaneously.
Child safety Lock
Safety Lock
Setting the Energy Saver Timer
(products with this feature only)
Menu Plus Button
Menu Minus Button
Plus Adjust Button
Minus Adjust Button
Cleaning
Do not use strong, corrosive, spray or abrasive cleaners. Clean
with a soft cloth or brush and mild soap and water.
Do not spray water over the tap as it may damage the low-
voltage electronics.
Undersink units must never be located near, or cleaned with
water jets.
